Resoled Redwing 875 6″ Moc Toe Boots.

Posted on by Rob Drews

A while back I came across a used pair of Redwing 875.  The original soles had been worn to down to nothing but the uppers were in good shape. Knowing that they could be resoled I snatched them up for future use. They hung around in my garage for six months until this fall. I took them to my local Redwing retailer to have them sent back to the factory to be resoled. I was as little disappointed to find out they sent their boots to a local cobbler and not the place of origin, but agreed to send them out anyway. The local guy did a great job using Vibram soles instead of the Redwing stamped version.  When the boots landed back in the shop the associate oiled them and threw in some new laces before I picked them up.

If you are looking to get into a pair of Redwing having an old boot is a great way to go. Cost of the resole in this instance was $80 + tax.

Danner 6490 Hiking Boots

Posted on by Rob Drews

This is a pair of Danner 6490 Hiking Boots. This boot is the predecessor to the Mountain Light boot and dates back to the 1970s.

This Boot features:

  • premium handcrafted leather uppers
  • soft leather lining
  • Danner’s tri-fold tongue design similar to that of the Mountain Light with a less final height on the tongue
  • Leather sole with nailed Vibram sole
  • 4 swivel D ring, 2 hook lace

Stamped inside:
Size 9 1/2 D Style 6490 Lot 2559 Danner

Frostline Ski Bags & Boot Bag

Posted on by Rob Drews

Nice set of Frostline ski bags with matching boot bag circa early-mid 70s. Khaki and Royal Cordura throughout with nylon webbing. Sturdy construction and well sewn.

Ski Bags measure:
82″ long x 11.5″ wide

Boot Bag measures:
16″x16″x8″

The boot bag has individual pockets for the boots accessible from the outside. Top zipper gives access to a gear pocket protected from the boots.

Chippewa USA Crepe Sole Chukka Boots

Posted on by Rob Drews

Vintage Chippewa USA 3-hole chukka boots.  These boots consist of a basic two-piece split leather upper welted to a neoprene oil resistant sole. The tongue is gusseted to the boot sides making  the boot more weather resistant.

Older black label containing Chippewa Falls, Wis sewn to right tongue. Other markings inside include the following:

8D 9944
4025

Lowa Climbing Boots Mens 5 1/2 N – Womens 7

Posted on by Rob Drews

This pair of German made Lowa heavy duty climbing boots is currently for sale on the Basecamp Vintage Etsy Store.

These boots have some superfluous scratching and markings on the uppers but that’s about the extent of the wear. Exterior leather on the uppers shows no stress points, cracks, gouges or other serious weathering. A gusseted single tongue keeps the weather out when laced via the swivel rings and hooks with candy cane laces.

Inside the boots are fully lined with soft full-grain leather. The shaft has a layer of padding sandwiched between inner and outer for comfort. Soft padded cuff at the top of the shaft is in great shape with no cracking. Previous owner’s name has been blacked out with marker but other wise insides are very clean and odor free. There is a lightly padded insole also in nice shape.

The double stitched welt is in great condition with no broken stitches or separation between the boot and sole. Attached is a fine Vibram Montagna Italian made lugged sole. The sole shows very little signs of wear save for the few pebbles living within its grasp since the boots were last used.

There are a few great attributes about these boots one can really appreciate. My personal favorite is that the entire upper (minus the tongue) is made from a single piece of leather. This pieces is fused by two double stitched seems on the inner side of the boot. One of the greatest seems on a boot I’ve ever seen.

Very nice patina on these boots as is but they could really use a rub of Lederbalsm before being put back into service.

Inside these boots are stamped N 5 1/2 0542
Please note these boots may differ from a typical US size 5 1/2, check measurements below.

Insole measures:
9 5/8 inches heel to toe
3 1/4 inches wide at ball of foot

Outside of the boot measures:
approx 10 3/8 inches heel to toe

Shaft Height:
6 1/4 inches from welt

WESCO Motorcycle/Work Boots

Posted on by Rob Drews
Vintage WESCO Boss Engingeer Boots

Unique boots in the fact that they zip the length of the shaft on the outside. The lower part of the boot is essentially the same as the Boss engineer boot, showing the same construction and ankle strap, above that is a 10.5 inch, heavy gauge gold TALON Zipper. WESCO does make custom boots, It’s very likely this pair was a special order. WESCO West Coast Shoe Co. embossed on the fronts. Stacked leather heels with Vibram soles