1950s Football Sideline Warm Up Jacket.

Posted on by Rob Drews
Vintage 1950s Football Sideline Warm Up Jacket

What I believe to be a 1950s football sideline warmup jacket. The jacket is made of a thick, blanket like denim with an oversized cut. D shaped pockets on the exterior and interior. Metal clasp closure. Silk screened Mahomet Bulldogs 10 on the back. I’ve traced the logo back to an Ohio High School, but know little else about the jacket or manufacturer as there’s no label. I’d guess the piece or pieces like it were manufactured by Champion or Wilson. A part from them appearing in some old photos, there’s really not any information on these available.

1980s North Face Brown Label Down Jacket

Posted on by Rob Drews
Vintage 80s The North Face Brown Label Down Jacket

Nice example of a later first generation puffer jacket.  This piece was manufactured in the mid 1980s near the end of this iconic style’s run. Some of the giveaways as to its more recent age are the embossed buttons, TNF branded zipper pull and materials tag.  Earlier versions of this jacket were made of rip stop nylon inside and out as opposed to the 65/35 poly cotton shell seen here. Construction also included what I refer to as stitched rivets at stress points such as pocket openings.

The earliest down jackets from The North Face (and brown label equipment in general) were all made in the USA, but the label didn’t start reflecting that until the late 70s when a shift in manufacturing started to take hold. It wasn’t until people started to question where their items were made that it became part of the strategy to include ‘Made in the USA’ in the branding.

Holubar Tubular Waist Pack

Posted on by Rob Drews
intage Holubar Orange Waist Pack Boulder CO

Unique tubular shaped Holubar waist pack. The pack is made of heavy orange nylon with straps constructed from the same material, doubled over for strength. The almost oddly long bag measures 18″ by 6″ high and 6″ deep. Where as most waist packs are relatively abbreviated in width to sit either squarely in front or behind the user, the length of this bag would cause it to wrap around most users. To battle this, the straps are inset on the bag as opposed to attached to the ends of the bag. D rings at the top could be used to secure rolled items such as a jacket to the outside, or possibly even to attach the pack the bottom of a day pack with corresponding lashing squares.

Unknown 1960s Leather Motorcycle Pants

Posted on by Rob Drews
Vintage 1960'S Motorcycle Black Leather Pants

The pants bear no makers label, but are believed to be from the 1960s based on the zippers. Those are Talon at the crotch and Ideal at the pockets and ankles. Pants feature a built-in belt. Heavy duty snaps, grommets and rivers. Also has belts around the calfs. Those belts are attached on the back of the leg and free around the front. Pants are unlined with black poly cotton pocket linings. Believed to be top quality steer hide, but possibly horse.

I was hopeful these would be identified as custom Langlitz Leather or Buco pants, but have found little to support either. If anything the hardware used disqualifies them from being Langlitz as another collector told me. If they look familiar please let me know.

 

Carikit by Holubar Down Insulation Layer Jacket.

Posted on by Rob Drews
Holubar Carikit Down Insulation Layer Jacket

Carikit was Holubar’s foray into the sew-it-yourself market in the mid 1970s. The name was later changed to Holubar Sew-It-Yourself Kits for stronger brand recognition with the parent company. This garment could be used as a layering piece or  worn as a jacket. The style first popularized by Eddie Bauer features elastic cuffs and collar. Small snaps and two front pockets.

1960’S Levis Leather Type 3 Leather Jacket – Big E

Posted on by Rob Drews
Vintage 60'S Levis Leather Type 3 Jacket - Big E- suede rough out

1960s Levis leather rough out leather jacket. The Jacket is similar in cut and construction to the Type 3 denim jacket produced during the same period, but has some pattern differences namely in the sleeves. Type 3 denim jackets are constructed using basically two pieces (not including the cuff) while the sleeves on this jacket are made up of four pieces. The torso of the jacket follows a much more similar pattern. Another noticeable difference is the use of snaps instead of the metal stud buttons.

I’ve seen other listings claiming the jackets are suede, but I would classify it as rough out. The texture (even when new I am guessing) is just not as fine as suede. I’ve also seen listings claiming buck skin, which I can see judging by the inside of the jacket, but it seems more likely they were made from cow hide.

Similar jackets may contain Levi’s “short horn” Western Wear Label.

1982 Bell Moto 3 Helmet

Posted on by Rob Drews
1982 Bell Moto 3 helmet

You are looking at a prime example of an original Bell Moto 3 helmet. There’s been a lot of buzz around this iconic full-face motocross helmet in the last couple years. The lids have gained somewhat of a cult following amongst both the chopper and cafe crowds and today, even worn examples like this sell for upwards of $300 on Etsy and eBay. The demand has reached such a fever pitch it’s inspired Bell to reintroduce the design amid a flock of imitators doing the same.

The history of the Moto 3 begins with the introduction of the Motostar in the late 70s and continues to present times with a series of numbered iterations. Contrary to what I’ve read, the Moto 3 is not the beginning of the line and was not introduced in the early 70s. Early Bell helmets (and this goes for some other manufacturers as well) are dated on the chin strap with an embossed or printed month and year. You can see here, this particular example is 8/82.

Looking for a cheaper, less cliché full face option to complete your look? Try the Moto 3’s younger brother the Moto 4. Similar in style, the 4 sells for around a third of the price while still offering that vintage motocross look you desire. Wanting something even cheaper and more original? Search for vintage Bieffe motocross helmets. They’re of a more late-80s early 90s aesthetic, complete with awesome decal arrangements and sell for around $30 in good used condition.

 

Vintage Belstaff Tourmaster Enduro Motorcycle Boots

Posted on by Rob Drews
Vintage Belstaff Tourmaster Enduro Motorcycle Boots

These rare 70s era Belstaff motorcycle boots were crafted in England and probably an expensive import for their day. The style is somewhere between a motocross and a road touring boot. The 15.5 inch shaft (measured outsides as the boots slope down on the inside edge of the shaft) is made easily accessible by the heavy gauge metal zipper at the back. The zipper features a large pull tag ensigned with the letter ‘a’, a maker’s mark I am not familiar with. Cinching straps at the heel and top of the shaft allow for a more custom fit. The solid one piece vamp rises high on the shaft for added protection from the road and elements. The soles are a heavy lugged rubber of similar style to that of a Vibram hiker, but are unlabeled. The inch and quarter tall heel has a metal insert which appears to have been hand carved and hammered in to prolong the wear and may lead to some show stopping sparks at night if dragged ever so lightly across the asphalt. The top of the shaft is finished with a yellow leather insert that creates a nice finish and compliments the gold Belstaff logo on the outside of each shaft.

Vintage Work Hunting Boots. Unknown Maker. Goodyear Lugged Sole

Posted on by Rob Drews
vintage US Army Snowshoe skiing boots

Very cool old boots, unfortunately I don’t know who made ’em. Quality on par with any Danner or Red Wing make or model. 7.5 in high shaft. Unique vamp construction minimizes seems. Eyelet and hook lace up. Goodyear lugged soles the America equivalent of Vibram. Lined uppers and thick felted wool insoles suggest they were intended for colder weather use.

UPDATE: Reader comments have identified these as “US Army issue Ski/Mountain boots. The original design is by Chippewa, but several manufacturers produced them over the years. The squared toe and grooved heel are for the ski bindings.”

Early-mid 70s Sierra Designs 60/40 Mountain Parka

Posted on by Rob Drews
Early-mid 1970s Sierra Designs 60/40 Mountain Parka

The original 60/40 mountain parka by Sierra Designs. Constructed of the fabric famed for its day as the superior protector against the elements. In a time before Gore-Tex and other such membrane backed fabrics, this blend of Nylon and Cotton loomed with a tight weave was the number one choice of outdoor enthusiast against rain, snow and wind. Prior to its introduction in 1968 most parkas of this style were made of a Polyester and Cotton blend which was much more permeable to the elements. This particular example is an earlier version evident by the sparse labeling and lack of embossed buttons.

The parka is constructed of a Navy Blue shell made entirely of the 60/40 material. The classic construction includes two hip pockets with side entry and Velcro closed top entry. Two bellowed chest pockets also with Velcro closure. A single zip closed back pocket which opens up to the entire upper half of the jacket body. Closure consists of a large gauge YKK zipper with extended pull for ease of use while wearing gloves. Also a snap close-storm flap. Features an integrated hood with offset seams to prevent pooling around the neck and shoulders. Inside the khaki liner is made from 60/40 up top and through out the sleeves and hood to further guard against the elements where it matters most. Then a lighter nylon lighter around the lower allowing the jacket to slide easily over the hips. Nylon cord cinch runs through the hood with leather lace locks. Also a Nylon draw cord at the waist which most likely also had the leather locks at some point, but are now missing.