Sierra Designs Starflight Two-man Backpacking Tent – Berkeley California

Posted on by Rob Drews

Berkeley era Sierra designs two-man two or three season asymmetrical tepee style tent. Features a two pole construction. Poles fit into grommets at the base of the tent then connect at the top through and elastic cord with the use of a heavy plastic pin joint. Two cords at the corners of the foot end of the ten running through grommets anchor that end up and out. The body has a half-moon zip fly screen door and Velcro closing outer door. There is also a small screen window on the top of the tent body about 3/4 of the way up from the foot to the peak. Tent rain fly stakes around from the base resting on the peak of the poles the fly door is Velcro closed as well.

Tent and fly are numbered 051302 and 050601 respectively.

Measures:
53″ high at peak
97.5″ long
58″ wide
25″ long by 5.5″ wide when packed

Weighs approx: 5 lbs

Camp 7 Gore-Tex Windbreaker

Posted on by Rob Drews

Camp 7 medium duty wind breaker. Gore-Tex shell in light navy, fully lined with mustard nylon.  Exposed main zipper in purple/grey with gold pulls by Talon makes for a subtle yet exciting contrast of colors. Elasticated cotton wrists and waist draw cord. This jacket has a slight contour around this midriff.

Extremely functional hood, draw string is run between the hood and peak and when cinched offers great closure with no bunching creating a brim that extends down the sides of the face. Leather cord locks keep the fit secure.

Camp 7 was a Boulder Colorado based company and 3rd brain child of outdoor gear pioneer George Lamb, founder of Alp Sport and Alpine Designs.

Truckin’ Rucksack Co. Seattle Washington U.S.A.

Posted on by Rob Drews

Unique small rucksack by Truckin’ Rucksack Co of Seattle Washington USA.  Wish I had more details on the company and the origin of this bag, but I don’t and have not found anything out there. I’ve seen similar packs from unknown companies made in Japan but they always seem to be of a little inferior quality to this bag. This ruck sack is very small, almost child size, but such as the label depiction suggests, my guess is that it’s just intended to be used as a small day pack on  backpacking trips.

The nylon bag is coated on the inside with a poly urethane or similar rubberized substance for waterproofing.  The main compartment of the bag is made from a single piece of material with two wedges inserted on the side. One decent sized zip closed canister pocket lives on the outside.  Top draw string and flap closure. 7/8 inch wide nylon straps are gusseted with a piece of brown vinyl.

The label is screened on a cotton blend patch. This one bears the previous owners info.

Type A-2 Flight Jacket by Rough Wear Clothing Co.

Posted on by Rob Drews

WWII era Rough Wear Clothing Co. Type A-2 Horsehide Flight Jacket size 36. Rough Wear was one of several different companies to produce these “summer” jackets for the US Army Air Force as is was called in those days. Earlier contract numbers from them date back to pre-war, but the model number on this one puts it in war-time production. The label, markings, hardware and stitching are all consistent with those found on other original jackets. This jacket has no art work present on it, but you can see the stitch marks from where a bar patch was sewn on each shoulder epaulet.

The horsehide exterior is in nice shape with no holes, stains, or significant gauging. Nice patina and wear throughout, this jacket appears not to have been re dyed maintaining its russet-brown color. Most significant wear on the leather is in the elbows but all stitching is still intact. The cotton inside is still complete but is coming away at the neckline and armpits. Cotton cuffs have been replaced with a slightly darker brown than the waist and hand stitched to the lining.

Tag reads:

Type A-2
Drawing No. 30-1415
Contract No. W535AC-27752
Rough Wear Clothing Co.
Middletown, PA
Property Air Force U.S. Army

Deadstock 1960s Chippewa Steel Toe Engineer Boots

Posted on by Rob Drews

This is a pair of deadstock Chippewa Steel Toe Engineer Boots. Black Label includes Chippewa Falls Wis. These boots can also be dated by the ANSI ( American National Standards Institute) 1967/75 marking. Sturdy split leather uppers with nickel hardware, steel toe, stitched leather mid-sole.

These boots are unworn as evident in the pristine Vulcan Neoprene Heel and Nitrene Sole. Uppers do have some light scuffing and wear from sitting around for 40 years but are otherwise in great shape. These boots could be polished to a shine if desired.

Inside markings:
ANSI
Z4L1-1967/75
9EE 3045
7863

Measurements:
heel height 1.75″
shaft height 11″
Heel to Toe (sole) 11.75″
width at ball of foot (sole) 4.25″

Class-5 Mountain Parka

Posted on by Rob Drews

This vintage Class-5 parka done in rust features classic styling comprised of materials and craftsman ship that was top of the line in its day. It has clean lines that were innovative for the time.

Cotton blend throughout, most likely 65/35 polyester cotton or similar (no materials tag). Double layer lined in khaki through out. 3 piece hood nylon draw cord. Two-way heavy gauge YKK sleeping bag zipper and snap front closure. Drawstring waist cinch and two snap adjustable cuff. Two top and side entry hip pockets. Left breast zippered pocket. Also, one zippered back pocket.

Class-5 the self-proclaimed Standard of The World was is  California-based outdoor gear company founded in the early 70s by Justus Bauschinger a designer for Trailwise and The North Face. The company was known for their innovative designs and marketing.

Red Wing 57000 Ankle Boots

Posted on by Rob Drews

Vintage USA made Red Wing ankle high work boots. These plain toe boots use a four eyelet three hook lacing system.  Black with White reinforced stitches on the split leather uppers. Crepe type sole with no branding. Single Red Wing logo sewn in to right boot tongue only. Tongues stamped with size 7D and 57000

These boots are in good wearable shape. A few scuffs and scrapes on the heels and toes,  most notably one small nick on the right toe. No heavy wear or gauging in the leather though. Nice patina throughout.
Soles show a little wear on heels and across ball of foot, but otherwise in nice shape. Welt is firmly intact as well.

Sole measures:
heel to toe: 11 1/8″
width at ball of foot 3 5/8″

The North Face Garment Bag

Posted on by Rob Drews

Travel in style with this early 80s TNF garment bag. This khaki and navy Cordura and Nylon bag is in good shape and ready to go.

Folded it measures 22″ wide by 20″ high and can be carried using a the soft leather hand strap or nylon shoulder strap. Front pocket containing the label zips at top and has front facing zip pocket as well. On the back side there is a small map pocket with Velcro access between the nylon webbing. Buckled compression straps on either side keep the bag together when folded.

Open the bag measures 40″ high. there are two pockets on the inside, the top measures about 22″ x 20″. The bottom is roughly the same size but is partitioned in down the middle. The inner Cordura layer zips 3/4 the way around to reveal the nylon inside measuring 22″x40″. There is a nylon belt across the center to secure garments. As well as two pockets at the top. There is a metal rod running through the middle of the bag at the fold for support.

All zippers are heavy-duty YKK and snaps are The North Face branded and in perfect working condition. There are some black marks on the front and bottom of the bag from use ( see photos) other wise is clean and free from holes. The insides are in near perfect condition.

1980s JanSport Leather Bottom Day Pack Backpack

Posted on by Rob Drews

Large day pack model has one main compartment, two side compartments with slide through channels between them and the main. This particular pack is an older version than what you may be used to seeing. The main differences are that it’s slightly squatter in shape, has lace through front compressions straps instead of plastic buckles. It also has a leather gussets on the back panel where the straps attach. This was a common practice on earlier day packs that was later foregone to save on production costs.

Lashing squares: 2 top, 2 bottom, 1 front. Large JS branded leather lashing panel as well. compression straps across main compartment front. Padded adjustable shoulder straps and nylon waist strap.

This pack is in good shape for its age. The Cordura upper is pretty clean. There is some slight discoloration around the main zipper at the top and side zippers, as well as on the back. All stitching is intact and complete. The leather bottom shows signs of wear but has no holes or deep gouges. Stitching around the bottom lashing squares is coming undone around the corners but they are still held securely. Inside is clean with fabric backing intact. All zippers and clasps work.

Main compartment measures (across back)
16″ high
13″ wide -at bottom
6″ deep

Danner 6490 Hiking Boots

Posted on by Rob Drews

This is a pair of Danner 6490 Hiking Boots. This boot is the predecessor to the Mountain Light boot and dates back to the 1970s.

This Boot features:

  • premium handcrafted leather uppers
  • soft leather lining
  • Danner’s tri-fold tongue design similar to that of the Mountain Light with a less final height on the tongue
  • Leather sole with nailed Vibram sole
  • 4 swivel D ring, 2 hook lace

Stamped inside:
Size 9 1/2 D Style 6490 Lot 2559 Danner