The always innovative Camp 7 line is descendant of the Alp Sport and Alpine Designs lines conceived by founder George Lamb of Boulder Colorado in the 1970s. This coat is exemplifies the company’s innovative spirit in the cut and construction of this outdoor staple.
Notice specifically the construction of this coat around the arms. Where many competitors would join the torso with the arms in simple perpendicular fashion, the Camp 7 design utilizes a more complex design that includes additional quilting to form a more contoured fit and eliminates a hard shoulder seam. Additional details including the internal seam finishing in black along the back and front panels reduces fraying on high friction areas. Designers also chose the use of Polargaurd for the pocket insulation as opposed to down. Polarguard, a relatively newer product for the period was probably seen as a more durable alternative for an often used, well-worn area.
Subtle differences in the hood color, embossed snaps, which differ from the coats snaps and individual materials tag suggest the hood was a sold separately option for this coat.
ALP by Alpine Designs followed the Alp Sport label, but predicated Alpine Designs in the company’s lineage. I’d estimate this bag to date from the mid to late 60s possibly into the early 70s. The Bag is constructed of nylon and down fill. Unlike many other bags of the latter era this is not a “Mummy Bag”. There’s no built-in hood, though there is a draw string around the top to seal in heat. The draw would be held closed by the leather tabs. This suggests the bag predates innovations such as the cord lock and the popularity of the mummy bag. The bag also has ties at the top to hold the bag when rolled, so it doesn’t come with a stuff sack. It could however be transported in that manner for safer keeping.
The bag measures 70″ long and 28″ across at the top. Above he ALP label is a personalized name tag, indicating its former owner was a female. The last name, Pollard is also stenciled on the outside back of the bag.
There’s no tag giving down fill left. The bag weighs 3+ pounds and the fill is still very much puffy. Over 6″ thick when zipped. I’d say the bag would be easily good down to low double digits, possibly single.
Alp Sport was started in Boulder Colorado in the early 60’s and later became known as Alpine Designs. This unique jacket comes from that transitional period sometime in the mid to late 1960s.
The shell is constructed from a tightly woven nylon which is light and dense, much like modern shells. The down fill is fairly lofty, but this definitely not an expedition piece. The subtle outside gives way to an all cotton, vibrant paisley lining. Talon zippers, with Alpine Designs’ edelweiss flower logo embossed on the snaps. The gommeted tab suggest it could be used as a ski jacket.
This jacket can be seen as an early example of outerwear as a fashionable piece. In the late 60s, early 70s decades of advancements in outdoor gear design started popping up on college campus’ nation wide as students embraced this new style. A sea change that helped propel companies like The North Face and Patagonia into the upper stratosphere, while giving rise to a whole new crop of labels and the eventual demise of most.
Camp 7 medium duty wind breaker. Gore-Tex shell in light navy, fully lined with mustard nylon. Exposed main zipper in purple/grey with gold pulls by Talon makes for a subtle yet exciting contrast of colors. Elasticated cotton wrists and waist draw cord. This jacket has a slight contour around this midriff.
Extremely functional hood, draw string is run between the hood and peak and when cinched offers great closure with no bunching creating a brim that extends down the sides of the face. Leather cord locks keep the fit secure.
Camp 7 was a Boulder Colorado based company and 3rd brain child of outdoor gear pioneer George Lamb, founder of Alp Sport and Alpine Designs.
Take your backpacking trip back in time a few years with this early 70s A frame tent by Alpine Designs of Boulder Colorado. The always innovative George Lamb and his team did a great job on this simple, classic tent incorporating some great features.
This single wall tent features zippered screen and full door entries at either end making it ideal for two occupants. The tent also has zippered floor access at one end. Construction is achieved via four half inch diameter collapsible aluminum poles ran through the tent pole casing and lining into a machined aluminum member at the top. A draw cord running though the tent peak at the ends runs through this member and is staked into the ground. The rain fly sits over the top and ties to the tent cords or stakes into the ground on it’s own in some places.
Early external frame pack boards were made from wood or solid metal, then came the aluminum. The innovators at Alpine Designs saw a new progression in this pack made of a PVC plastic frame. It’s definitely one of the most unique external frame packs I’ve encountered, and probably for good reason. The use of plastics instead of aluminum seems to save no weight at all (if not adding some). It’s also hard to imagine this plastic could withstand the stresses, shock and temperatures of an aluminum frame. Still this pack has survived rather well with no cracks and all plastic hardware intact.
Regardless of materials, this pack is very well constructed with plenty of details that make it Alpine Designs. Leather zip assist tabs, integrated pack handle on the frame, and innovative lace loops to secure the top hatch to name a few. This pack also features very thinly padded shoulder and waist straps. It has no lashing squares but does have two pair of D rings on the underside.
Pack make-up includes:
1 top entry main compartment
1 front entry second main compartment
2 top entry side canister pockets
2 front entry secondary side canister pockets
1 small front entry compartment on the outside of the secondary main compartment.
Nice vintage Alpine Designs of Boulder Colorado down filled camp slippers. These men’s size large booties are comprised of a nylon upper and lining, thick Cordura base and bottom with a simi-rigid foot bed. Inside is a ring of elastic around the mid ankle to keep them from slouching. There is a full, tie-able drawstring around the top of the ankle. The down is still full and pillowy making for some very warm, very comfortable slippers.
heel to toe: 12.5 inches
width across ball of foot: 4.5 inches